The Check Job Function command checks for an active job having a
specific Function type-description as seen with WRKACTJOB such as
'PGM-xxxx'. Multiple jobs may satisfy the request. A job name is
required, but *ALL may be specified. Both the Function type and the
Function description are optional.
The Function type and Function name can be seen with the WRKACTJOB
display under the 'Function' column heading. Positions 1-3 are the
Function and positions 5-14 are the Function type.
A typical command would be:
CHKJOBFNC JOB(XXX) FUNCTYPE(PGM) FUNCTION(ABC)
If any active job XXX has a Function of PGM-ABC, the command would
complete normally with a message for the job. If more than one job
satisfies the request, a summary message is also sent as a completion
message.
The default for the qualified job name is *ALL users and *ALL job
numbers. A specific value may be entered for either.
If no job exists for the XXX name or the Function PGM-ABC, the
TAA9891 escape message would occur.
The command may also be entered as:
CHKJOBFNC JOB(XXX) FUNCTYPE(DLY) FUNCTION(*ALL)
If an active job XXX is in a delay of any time, a message would be
sent describing the job and the delay time.
The command may be entered without either a specific FUNCTYPE or
FUNCTION as both default to *ALL. This provides a quick check to see
if any jobs are active with the specified name.
CHKJOBFNC JOB(XXX)
If an active job XXX exists, the command would complete normally with
messages for the job.
Both the job name and the user name may be generic such as:
CHKJOBFNC JOB(*ALL/uuu*/jjj*)
The function name may also be generic such as:
CHKJOBFNC JOB(XXX) FUNCTYPE(PGM) FUNCTION(ABC*)
If the FUNCTION value is not a valid name, the entire value must
match.
Group Jobs and System Request Jobs
----------------------------------
An inactive Group job will appear on WRKACTJOB as GRP-name (F14 must
be used to display the additional jobs at the same device). It is
valid to test for this. Note however, if the group job is using a
display command when the group job is transferred from, it will still
display GRP-name rather than describe the display.
Similarly with System Request jobs that have been transferred from.
They will normally appear as PGM-QMNSYSRQS.
CHKJOBFNC escape messages you can monitor for
---------------------------------------------
TAA9891 The job and Function do not exist
The message text varies depending on whether there are no active jobs
or the Function does not exist.
Escape messages from based on functions will be re-sent.
CHKJOBFNC Command parameters *CMD
----------------------------
JOB The qualified job name of the active job to be
checked. A job name is required. A specific job
name, a generic name, or *ALL may be entered.
The default for the USER portion is *ALL. A
specific user name or a generic name may also be
entered.
The default for the job number portion is *ALL. A
specific number may be entered.
If all 3 values are *ALL, it is probable that the
number of jobs will exceed the 200 internal maximum
limit and an escape message will be sent before the
FUNCTYPE and FUNCTION values are checked. Avoid the
use of *ALL for all 3 portions of the job name.
FUNCTYPE The function type to be checked. *ALL is the
default The Function Types are described in the API
Work Management Attribute Descriptions
documentation. These have one byte codes internally
that mostly appear as 3 characters on the WRKACTJOB
display. It must be one of the following
abbreviations:
API Abbrv Description
*ALL Any function type
C CMD Command
D DLY Delay
G GRP Group job
I IDX Index build
J JVM Java virtual machine
L LOG History log is being written
M MRT Multiple requester program
N MNU Menu
O IO Input/output
P PGM Program
R PRC Procedure
* * Special value
See WRKACTJOB help text
FUNCTION A description of the Function. A character string
or a generic value may be entered. *ALL is the
default meaning any Function description. Up to 10
bytes may be entered to match the value on
WRKACTJOB.
A number may be entered such as for a Function type
of DLY. If the value is a name (such as a program
name), a generic value may be used such as ABC*. If
the value entered is not a valid name, the entire
value must match.
Both the Function value and the value as seen on
WRKACTJOB are folded to upper case before a
comparison is made.
Restrictions
------------
The number of jobs that match the JOB parameter may not exceed 200.
Prerequisites
-------------
The following TAA Tools must be on your system:
CHKGENERC Check generic
EDTVAR Edit variable
RTVJOBA2 Retrieve job attributes 2
RTVJOBSTS Retrieve job status
SNDCOMPMSG Send completion message
SNDESCINF Send escape information
SNDESCMSG Send escape message
TRNVAL Translate value
Implementation
--------------
None, the tool is ready to use.
Objects used by the tool
------------------------
Object Type Attribute Src member Src file
------ ---- --------- ---------- ----------
CHKJOBFNC *CMD TAAJOFJ QATTCMD
TAAJOFJC *PGM CLP TAAJOFJC QATTCL
|
