The Work IFS 2 command is designed for a review of IFS entries, but
does not allow any changes to be made. Several selection and
sequencing options exist. The WRKIFS command is similar, but allows
removal of entries and access to WRKLNK.
From the WRKIFS2 display the user has options to display stream file
data, display/print the attributes, and display the authoriity.
If the default for OBJ is used, CVTIFS is run internally which can
take a long time. An option exists to use CVTIFS ahead of time to
create a file (using OUTFILFMT = *TYPE2) that can be used by WRKIFS2.
You must be authorized to the TAACVTIFS authorization list to use
WRKIFS2.
Depending on what is requested, the internal command CVTIFS can take
a long time (also the use of F5=Refresh on the display) to create the
file used by WRKIFS2. You may use the CVTIFS command directly to
create the file and then specify OBJ(*EXISTS) function if repeated
use will occur.
A typical command would be:
WRKIFS2 OBJ(xxx) SIZE(1000000 *GE)
WRKIFS2 uses CVTIFS internally unless you have done a prior CVTIFS
and specify OBJ(*EXISTS). For the fastest use of WRKIFS2, it is
recommended that you use CVTIFS first (it can be a long runner) and
then query the output with the WRKIFS2 command. You must specify
OUTFILFMT(*TYPE2) when using CVTIFS. The file name must be IFSDIRT.
If WRKIFS2 is used to create the IFSDIRT file, the IFSDIRT file is
left in the library specified (such as QTEMP). You can then specify
OBJ(*EXISTS) and the IFSDIRPLIB library to allow faster processing of
a different type of request.
Differences with DSPIFS
-----------------------
DSPIFS provides the same selection and sequencing capability and
prints a listing. Because the object names can be very long, they
are truncated on the listing so you may not be able to determine the
actual path name of an object you want to remove.
WRKIFS2 escape messages you can monitor for
-------------------------------------------
None. Escape messages from based on functions will be re-sent.
WRKIFS2 Command parameters *CMD
--------------------------
OBJ The path name of the object to be converted. The
object path name can be either a simple name or a
name that is qualified with the name of the
directory in which the object is located. The
default is *.
Specifying * will start the convert process at the
current directory level. If the current directory
level is at the root ('/'), the convert process will
start at the home directory ('/home').
The special value of *IFS may also be entered.
Specifying *IFS will start the convert process at
the root directory level ('/') excluding /QDLS,
/QOPT and /QSYS.LIB. If directories are to be
excluded, CVTIFS must be used with the OMITDIR
parameter.
The special value *EXISTS may be entered if CVTIFS
has already been run and you want to use the created
outfile. If *EXISTS is used, the IFSDIRPLIB and MBR
parameters must specify the library and member of
the existing IFSDIRT file. You must specify
OUTFILFMT(*TYPE2) when using CVTIFS.
If WRKIFS2 is used to create the IFSDIRT file, the file is left in
the library specified (such as QTEMP). You can then specify
OBJ(*EXISTS) and the IFSDIRPLIB to allow faster processing of a
different type of request.
SORTBY Whether the display should appear in a sorted
sequence. The default is *NONE meaning to use the
sequence of the data in the IFSDIRT file (created by
CVTIFS).
*OWNER may be entered to sort by owner name (IFOWNR
field).
*SIZE may be entered to sort by the size of the
object. See the SIZETYPE parameter for whether this
is the allocated or actual size of the object.
*CRTDATE may be entered to sort by the creation date
of the object (IFCRDT field).
*CHGATTR may be entered to sort by the last change
date of the attributes of the object (IFCHDT field).
*CHGDATA may be entered to sort by the last change
date of the data in the object (IFMODT field).
*USEDATE may be entered to sort by the last used
date of the object (IFLUDT field).
*DAYSUSED may be entered to sort by the number of
days used (IFDYSU field). This information is
updated once per day. It is not a count of the
number of times used. This data may not be accurate
for system objects.
*TYPE may be entered to sort by the type of object
(IFOTYP field).
SEQ The sequence of the sort if specified. The default
is *ASCEND for ascending sequence. *DESCEND may be
specified for descending sequence.
This parameter is ignored if the SORTBY parameter is
*NONE.
OBJNAM The object name to select. The default is *ALL.
A specific name may be entered or a generic* name.
The generic name can be any one of the following
types:
ABC* Select all names beginning with ABC.
A*C Select names like ABC ABBC AXYZC
A*C* Select names like ABC ABCD ABBCD
*AB* Select names like AAB AABC XAB XABC
however, if an embedded * exists (such as A*C), or
multiple *s (such as A*C*), the value must be
entered in quotes.
OBJTYP The object type to select. The default is *ALL for
all object types. Some typical IFS object types are
shown in the command prompt. Depending on the path
name, it is also possible to use other object types
such as *LIB.
OWNER The owner of the object to select on. The default
is *ALL for all owners.
A specific user name (or a generic user name) may be
entered or the special values:
*USER for non-system supplied user profile
names.
*SYS for system user profile names.
The determination of whether the profile is a system
supplied name is done by the tool RTVIBMPRF.
SIZE The size selection if any. This is a two element
parameter.
The first element is the size value which defaults
to *ALL meaning that size will not be considered for
selection. A size may be entered that is 0 or
greater. The size selected on depends of the
SIZETYPE value specified.
The second element is the 'size operator' that
determines how to compare the size value. The
default is *GE. The standard Boolean operators are
supported. The operator is ignored for SIZE(*ALL).
SIZETYPE The type of size to be displayed. The value also
determines how the SIZE and SORTBY(*SIZE)
specifications will be processed.
*ALLOC is the default for the allocated size of the
objects. The IFASIZ field is used. This is the
same concept as used by i5/OS where object sizes
shown by commands such as DSPOBJD are for the
allocated size.
*ACTUAL may be specified for the actual size of the
objects. The IFOSIZ field is used. This is the
size that would be shown if viewing the object from
a PC.
CRTDATE The create date of the object to select for if any.
This is a two element parameter.
The first element is the create date value which
defaults to *ALL meaning that create dates will not
be considered for selection. A date may be entered
in job format. The field selected on is IFCRDT.
The second element is the 'create date operator'
that determines how to compare the date. The
default is *GE. The standard Boolean operators are
supported. The operator is ignored for
CRTDATE(*ALL).
CHGDATE The change date of the object to select for if any.
This is a two element parameter.
The first element is the change date value which
defaults to *ALL meaning that change dates will not
be considered for selection. A date may be entered
in job format. Both the attribute change date
(IFCHDT field) and the data change date (IFMODT
field) are used for selection with an 'or'
condition.
The second element is the 'change date operator'
that determines how to compare the date. The
default is *GE. The standard Boolean operators are
supported. The operator is ignored for
CHGDATE(*ALL).
USEDATE The 'last used date' of the object to select for if
any. This is a two element parameter.
The first element is the 'last used date' value
which defaults to *ALL meaning that 'last used
dates' will not be considered for selection. A date
may be entered in job format. The field selected on
is IFLUDT.
The second element is the 'last used date operator'
that determines how to compare the date. The
default is *GE. The standard Boolean operators are
supported. The operator is ignored for
USEDATE(*ALL).
DAYSUSED The 'number of days used' to select on if any. This
is a two element parameter.
The first element is the 'number of days' value
which defaults to *ALL meaning that days used will
not be considered for selection. A 'number of days
used' may be entered that is 0 or greater. The
field selected on is IFDYSU.
The second element is the 'number of days used
operator' that determines how to compare the value.
The default is *GE. The standard Boolean operators
are supported. The operator is ignored for
DAYSUSED(*ALL).
The system only updates this information once per
day. The value does not reflect the number of times
an object has been used. The data may not be
accurate for system objects.
IFSDIRPLIB The library of the existing IFSDIRT file if
OBJ(*EXISTS) is specified. The default is *LIBL.
*CURLIB may also be entered.
The file must have been created by the use of CVTIFS
with OUTFILFMT(*TYPE2).
MBR The member of the existing IFSDIRT file if
OBJ(*EXISTS) is specified. The default is *FIRST.
*LAST may also be entered.
This parameter is ignored if *EXISTS is not
specified for the OBJ parameter.
USRPRF The user profile that will be switched to during run
time. QSECOFR is the default. For file systems
(such as QNTC), CVTIFS will fail if QSECOFR does not
exist.
*CURRENT may be used or a specific user profile, but
the profile must have *ALLOBJ special authority.
Restrictions
------------
You must be authorized to the TAACVTIFS authorization list.
A maximum of 9,999 IFS objects can be processed.
Prerequisites
-------------
The following TAA Tools must be on your system:
CHKGENERC Check generic
CHKIFSE Check IFS entry
CHKOBJ3 Check object 3
CHKSPCAUT Check special authority
CVTDAT Convert date
CVTTIM Convert time
DSPERRMSG Display error message
DSPIFSED Display IFS entry description
EDTVAR Edit variable
FILEFDBCK File feedback
PMTOPR Prompt operator
RSNLSTMSG Resend last message
SNDESCINF Send escape information
SNDESCMSG Send escape message
SNDJLGMSG Send job log message
TRNVAL Translate value
WRKIFS Work IFS
Implementation
--------------
None, the tool is ready to use.
Objects used by the tool
------------------------
Object Type Attribute Src member Src file
------ ---- --------- ---------- ----------
WRKIFS2 *CMD TAAIFUO QATTCMD
TAAIFUOC *PGM CLP TAAIFUO QATTCL
TAAIFUOR *PGM RPG TAAIFUOR QATTRPG
TAAIFUOD *FILE DSPF TAAIFUOD QATTDDS
|
