PRTADPPGM -- Print Adopted Programs

PRTADPPGM PRINT ADOPTED PROGRAMS TAASECU
The Print Adopted Programs command provides better printed output than the system command DSPPGMADP. PRTADPPGM allows you to better analyze the programs that use the USRPRF(OWNER) function on your system. You can request the adopted programs owned by an individual user, all users, all non-system users, or all system users. You may also exclude certain users. An alternative is to use the PRTADPPGM2 tool. Additional information is supplied such as the users special authorities and whether the program was originally created by the system. After you find the programs that you want to look further into, the TAA Tool PRTPGMSEC can be used to analyze individual programs. If you request one of the ALLxxx functions, only those users who own adopted programs will print. To specify an individual user profile, you must be authorized to access the user profile. To specify one of the ALLxxx functions, you must have the special authority ALLOBJ (e.g. QSECOFR). Command parameters CMD ------------------ USER The user who's adopted programs you want to print. The special value ALL may be entered to print all users. The special value ALLUSR may be entered to print all non-system profiles. The special value ALLIBM may be entered to print all system profiles. The system profiles are checked using the TAA Tool CHKIBMPRF. This only includes the shipped system profiles. Other profiles that begin with Q are considered Non-system profiles. OMITUSER A list of up to 20 users that you want to omit. The default is NONE. The performance of PRTADPPGM is very dependent on how many programs are owned by the users you request. The system must extract from the total list of owned programs to determine the programs that adopt. Therefore, the OMITUSER parameter can be helpful for profiles that own a large number of programs such as QSYS. For example, once you have checked the QSYS profile, you can avoid the overhead of accessing all the QSYS owned programs in subsequent uses of the command. ONELINEPER Whether to print one line per program or multiple lines. The default is NO, meaning to print multiple lines if it is applicable. If you are printing ALL or ALLIBM, you may generate a large spooled file. A YES value will reduce the number of pages, but you will lose some information. Restrictions ------------ To specify an individual user profile, you must be authorized to access the user profile. To specify one of the ALLxxx functions, you must have the special authority ALLOBJ (e.g. QSECOFR). Prerequisites ------------- The following TAA Tools must be on your system: CHK400CMD Check i5/OS commands CHKIBMPRF Check IBM profile CHKRPGCALL Check RPG CALLs EXTLST Extract list SNDCOMPMSG Send completion message SNDESCMSG Send escape message SNDSTSMSG Send status message Implementation -------------- None, the tool is ready to use. Objects used by the tool ------------------------ Object Type Attribute Src member Src file ------ ---- --------- ---------- ---------- PRTADPPGM CMD TAASECU QATTCMD TAASECUC PGM CLP TAASECUC QATTCL TAASECUC2 PGM CLP TAASECUC2 QATTCL TAASECUR *PGM RPG TAASECUR QATTRPG Structure --------- PRTADPPGM Cmd TAASECUC CL pgm TAASECUR RPG Pgm TAASECUC2 CL pgm

PRTADPPGM       PRINT ADOPTED PROGRAMS                 TAASECU


The  Print Adopted  Programs  command  provides better  printed  output
than  the system  command DSPPGMADP.   PRTADPPGM  allows you  to better
analyze  the  programs that  use  the USRPRF(*OWNER)  function  on your
system.

You can request the adopted  programs owned by an individual  user, all
users,  all  non-system users,  or  all system  users.    You may  also
exclude certain users.

An alternative is to use the PRTADPPGM2 tool.

Additional   information  is  supplied   such  as   the  users  special
authorities and  whether  the program  was  originally created  by  the
system.

After you  find the programs  that you want  to look further  into, the
TAA Tool PRTPGMSEC can be used to analyze individual programs.

If you  request one of the *ALLxxx functions,  only those users who own
adopted programs will print.

To specify  an  individual user  profile,  you must  be  authorized  to
access the  user profile.   To  specify one of  the *ALLxxx  functions,
you must have the special authority *ALLOBJ (e.g.  QSECOFR).

Command parameters                                    *CMD
------------------

   USER          The  user who's  adopted programs  you want  to print.
                 The  special value  *ALL may  be entered  to print all
                 users.  The  special value *ALLUSR  may be entered  to
                 print  all non-system  profiles.    The special  value
                 *ALLIBM  may be entered to  print all system profiles.

                 The system  profiles are  checked using  the TAA  Tool
                 CHKIBMPRF.   This  only  includes  the shipped  system
                 profiles.    Other  profiles  that  begin  with Q  are
                 considered Non-system profiles.

   OMITUSER      A list of up to 20 users  that you want to omit.   The
                 default is *NONE.

                 The  performance of  PRTADPPGM  is very  dependent  on
                 how  many   programs  are  owned  by   the  users  you
                 request.    The  system must  extract  from  the total
                 list  of owned  programs  to  determine  the  programs
                 that  adopt.   Therefore, the  OMITUSER parameter  can
                 be  helpful for  profiles that  own a large  number of
                 programs such as QSYS.

                 For example, once you  have checked the QSYS  profile,
                 you can avoid  the overhead of accessing  all the QSYS
                 owned programs in subsequent uses of the command.

   ONELINEPER    Whether  to  print one  line per  program  or multiple
                 lines.    The  default   is  *NO,  meaning  to   print
                 multiple  lines if  it  is  applicable.   If  you  are
                 printing  *ALL or  *ALLIBM, you  may generate  a large
                 spooled  file.   A *YES  value will  reduce the number
                 of pages, but you will lose some information.

Restrictions
------------

To specify  an  individual  user profile,  you  must be  authorized  to
access  the user profile.   To  specify one  of the  *ALLxxx functions,
you must have the special authority *ALLOBJ (e.g.  QSECOFR).

Prerequisites
-------------

The following TAA Tools must be on your system:

     CHK400CMD    Check i5/OS commands
     CHKIBMPRF    Check IBM profile
     CHKRPGCALL   Check RPG CALLs
     EXTLST       Extract list
     SNDCOMPMSG   Send completion message
     SNDESCMSG    Send escape message
     SNDSTSMSG    Send status message

Implementation
--------------

None, the tool is ready to use.

Objects used by the tool
------------------------

   Object        Type    Attribute      Src member    Src file
   ------        ----    ---------      ----------    ----------

   PRTADPPGM     *CMD                   TAASECU       QATTCMD
   TAASECUC      *PGM       CLP         TAASECUC      QATTCL
   TAASECUC2     *PGM       CLP         TAASECUC2     QATTCL
   TAASECUR      *PGM       RPG         TAASECUR      QATTRPG

Structure
---------

PRTADPPGM   Cmd
   TAASECUC   CL pgm
     TAASECUR   RPG Pgm
       TAASECUC2  CL pgm

Added to TAA Productivity tools April 1, 1995

Home Page

Up to Top